Search Product

Possible failures and solutions of Winder & cutter machine operation

1. The electric cross-cut does not work

check whether the proximity switch is damaged, the counting part is normal, and there is no interference; the proximity switch needs to be replaced, and the wire is changed to a shielded wire.

    


2 .The product cannot be cut

check whether the knife edge is worn, whether the knife holder support spring is at the lowest point (whether the upper nut of the hard knife is loosened); the knife edge needs to be polished to make it sharp, release the nut or lower the height.

    

Mein Inquiry Sheet (0)

INQUIRE NOW
0